ANODE-SOFT
ANODE-SOFT
Conditioning Water Naturally with Nature's Elements
NANODESOFT
How the Nanodesoft works
NANODESOFT
How the Nanodesoft works
About Water
To understand how our technology works let's first remember some basic facts about water. Water is sometimes referred to as the "universal solvent". This term is used as water has unique characteristics that allow it to break the bonds of larger more complex compounds. For example, place a small teaspoon of sugar or salt in a glass of water, stir vigorously and it will dissolve easily.
Although the water in your home is clear, it is not pure. Being a wonderful solvent, water is very receptive and dissolves small amounts of the soluble minerals it comes into contact with in nature. Water contains elements essential for healthy living, including calcium and magnesium.
Hardness in Water
Hardness in water is caused by Calcium and Magnesium. Conventional water softeners remove the essential Calcium and Magnesium macrominerals from the water supply, by replacing them with Sodium. One of the benefits of the solutions provided by Fluid Dynamics is that they do not remove these essential macrominerals.
Magnesium
While contributing to water hardness, Magnesium does not deposit as scale.
Calcium Carbonate
As we all know H2O can exist in various forms; Ice, Water and Steam.
Just as water can exist in various forms, so can Calcium Carbonate. The three forms of Calcium Carbonate are:
Calcite
Under certain circumstances ( temperature rise or an increase in pH levels), water is forced to discharge Calcium Carbonate. The Calcium Carbonate discharged in this way is Calcite, a hard scale. The discharge will accumulate on the nearest receptive surface, typically metallic.
Aragonite
Aragonite is a form of Calcium Carbonate crystal that, unlike Calcite, prefers to stick to itself and grow attracting more Calcium. It remains suspended in water rather than depositing on metal surfaces.
Events that cause scaling
Hot Water Scaling
In untreated hard water systems when contact is made with the hot surfaces found in water heaters, humidifiers, kettles, boilers, heat exchangers etc. scale will be deposited.
Calcium is inversely soluble, meaning that as the water temperature rises, the
amount of Calcium that can be held in solution decreases. When this occurs in hard water systems the excess Calcium that's been displaced by the temperature rise bonds with available Carbon to form Calcium Carbonate (in the Calcite form). This newly formed Calcium Carbonate is then deposited as scale on the nearest receptive surface.
Cold Water Scaling
In untreated hard water systems a rise in pH will also cause scaling. Carbon Dioxide dissolved in water under pressure takes the form of Carbonic acid. When the water pressure drops, at a faucet for example, the Carbonic acid gasses off in the form of Carbon Dioxide causing an instant pH rise ( making the water less acidic). Examples of pressure drops in systems that can produce pH related cold water scaling include nozzles, faucets and shower heads.
Nanodesoft Solution
Now that we've covered Calcium Carbonate, the two forms it can take in natural water and the events that trigger scale deposits, we are able to explain the mechanism behind our successful technology.
As water passes through our product it is subjected to a turbulent interaction with a catalytic core made of a proprietary alloy. The dissimilar metals and the water create a battery effect generating a very small electrical current.
This electric current causes an important change to take place. A percentage of the Calcium and Carbon in the water comes out of solution and goes into suspension forming Calcium Carbonate in the Aragonite state.
The microscopic Aragonite crystal formations remain suspended in the water and pass harmlessly through the system. Changes in temperature or pH no longer lead to hard scale deposits. The Calcium and Carbon that is placed in suspension as stable Aragonite crystals is no longer available in solution to be deposited as Calcite.
As the process repeats itself, newly created Aragonite crystal formations are continually produced thus preventing scale deposits. The process also continues to gradually remove any scale that may have accumulated in the past. This is due to the water being under saturated with dissolved calcium and carbon.
A more scientific explanitation
EXPLAINATION OF HYDRO CLUSTER / NANODES0FT METALLIC CERAMIC NANOTECH WATER CONDITIONING AND ITS IMPACT ON PLUMBING SYSTEM SCALE
COMMON TYPES OF SCALE IN PLUMBING SYSTEMS
The two most common forms of scale consist mainly of:
1. Calcium carbonate (CaCO3) and magnesium carbonate (MgCO3) (with binders).
This forms in hot water heaters, boilers, valves, sinks, shower enclosures, piping, etc.
2. Rust (in galvanized pipes) or corrosion (in/on copper, brass, aluminum, or chrome).
THE CHEMISTRY OF SCALE FORMATION In order to understand the process by which the ceramic nanotechnology conditioner (CNC) by HYDRO CLUSTER /NANODESOFT inhibits scale buildup (commonly called "lime" or "rust") and the way in which it breaks down and eliminates existing scale, it is necessary to understand the nature of scale and how it is formed. Calcium Carbonate and Magnesium Carbonate Scale (with Binders) Calcium carbonate, CaCO3, exists in nature as limestone and marble. Silica (SiO2), alumina (Al2O3), and calcium sulfate (CaSO4) are principal impurities in limestone and function as binders (cementing agents). Large deposits of magnesium carbonate, MgCO3, exist in nature with calcium carbonate in the form of dolomite, CaCO3. MgCO3, or as magnetite, MgCO3.
\ Limestone layers exist even in high mountainous regions, such as the Grand Canyon in Arizona, which has a depth of over one mile.
These were formed over millions of years from the remains of sea creatures precipitated to the bottom of the ocean where the CaCo3 contained in these remains combined with silica (SiO2), alumina (A12O3), and/or clay (SiO2 . A1203. 2 H2O), which serve as binders. In addition, limestone usually includes some MgCO3. In the case of the Grand Canyon, scientists have identified at least seven different limestone layers, each containing shells of marine animals, indicating that the region has been covered by at least seven different oceans in its geological history. CaCo3 is only very slightly soluble in water, yet large amounts of calcium become dissolved in most water supplies by the action of rainwater on limestone. Rainwater is somewhat acidic because, as it falls through the atmosphere, it reacts with carbon dioxide (CO2) to form carbonic acid (H2CO3) as follows: H2O + CO2 -> H2CO3.
When rainwater contacts limestone in the earth, limestone material is dissolved and goes into solution as calcium bicarbonate as follows: CaCo3 + H2CO3 -> Ca2+ + 2 HCO-. The carbonic acid ionizes slightly: H2CO <-----> H+ + HCO3 Since the ionization constant of HCO3- is very small, [H+] X [CO3 2-] KI = [HCO3-] The addition of H+ ions from the carbonic acid reduces the concentration of CO32- (ions that go into solution in the water from the CaCO3 solid) because the H+ ion and the CO32- ion combine to form the slightly ionized bicarbonate ion, HCO3-.
The reduction of the concentration of the CO32- ion in the solution causes more CaCO3 to dissolve in the form of Ca2+ + 2 HCO3- in an attempt to saturate the solution and produce a product of the concentrations of Ca2+ and CO32- ions that equals the solubility product. [Ca2+] X [ CO32-] = Ksp = 1 X 10-9 at 25oC Surface waters also dissolve carbon dioxide from soils where it is produced by the slow oxidation and decay of organic materials.
As these waters contact limestone, the limestone gradually dissolves.
Examples of this action are limestone caves and hard waters from wells. The Ca2+ + 2 HCO3- that is dissolved in water very readily converts into CaCO3 when water is heated to boiling. The solubility of CaCO3 decreases with increase in temperature and precipitates as CaCO3 as follows: heat Ca2+ + 2 HCO3- -----> CaC03 + H2O + C02. This is the basic reaction that forms the bulk of the 'lime' in water heaters and boilers. This reaction also occurs when water containing Ca(HCO3)2 evaporates and leaves a CaCO3 residue. The above-mentioned reactions also apply to magnesium and its bicarbonates and carbonates. For example: MgCO3 + H2CO3 -----> Mg2+ + 2 HCO3- However, MgCO3 is appreciably more soluble than CaCO3. [Mg2+] X [CO32-] = Ksp = 1 X 10-5 at25oC Scientists and engineers who have investigated scale formation in various industrial systems have determined that although CaCO3 and MgCO3 form most of the mass of lime-type scale, they require silica (SiO2), alumina (Al203), or calcium sulfate (CaSO4) to act as a binder to hold them in place just as they do in nature. CaSO4 exists in ionized form when dissolved in water as the ions Ca2+ and So42.
The solubility of CaSO4 increases with temperature up to about 100oF and then decreases with increasing temperature. Hence, precipitation of CaSO4 also occurs in water heaters and boilers. SiO2 and Al2O3 are not ions but are relatively neutral colloidal residues that are slightly soluble in water. SiO2 is found in fresh water in a range of 1 -100mg/liter. At high concentrations (over 50 mg/liter), chemical precipitation appears to occur. Colloids, including SiO2, Al2O3, and clay (SiO2. Al2O3. 2 H2O), when suspended in water usually carry a negative charge.
If these negative charges (extra electrons) are neutralized (extra electrons removed), the colloids coagulate, precipitate, and combine with (i.e., become absorbed by) CaCO3, MgCO3, and CaSO4 to form typical lime scale.
The denseness and hardness of the scale increases with increased concentrations of SiO2, Al2O3, and/or CaSO4.
Approximately 87 percent of the earth's solid crust consists of silicon compounds. Silica is one of the most abundant compounds of silicon. Aluminum is the most abundant metal and the third most abundant element. The most important ore of aluminum is bauxite, a mixture of hydrated aluminum oxide, Al2O3. 3 H2O and iron oxide. Calcium is fifth in abundance of the metals in the earth's crust, of which it forms more than 3 percent.
How the Ceramic NANODESOFT Conditioner (CNC) Functions to Prevent Lime Scale Formation and to Dissolve Existing Scale.
HYDRO CLUSTER /NANODESOFT metallic ceramic globe media with flow modulators include multiple ventures’ configured to prevent flow restriction while providing a high degree of turbulence and increased physical contact between: (1) the ions and molecules in the water; and (2) the ceramic globe media itself, thereby increasing catalytic efficiency.
Why the globes act as a catalyst: All metals give up electrons in their outer atomic shells easily. For this reason, metals are good or excellent electrical conductors.
Of all non-radioactive metals, cesium is the least electron acquisitive; it has an-electro negativity of 0.7 on the Electro negativity Scale of the Elements. Gold is the most electron-acquisitive of the metals and has an electro negativity of 2.4 on the Electro negativity Scale. The higher the electro negativity, the more acquisitive the element (atom) is concerning electrons for its outer shell to satisfy its own valence.
The most aggressive (electron-acquisitive) elements are all non-metals:
ELEMENT AND ELECTRONEGATIVITY: Fluorine 4.0; Oxygen 3.5; Chlorine 3.0; Nitrogen 3.0; Bromine 2.8; Carbon 2.5; Sulfur 2.5; Iodine 2.5; Selenium 2.4 The least aggressive (electron-acquisitive) elements are metals and include:
ELEMENT AND ELECTRONEGATIVITY: Gold 2.4: Hydrogen 2.1; Silver 1.9; Copper 1.9; Silicon 1.9; Nickel 1.8 Cadmium 1.7; Zinc 1.6; Tantalum 1.5; Aluminum 1.5; Manganese 1.5; Magnesium 1.2; Calcium 1.0; Strontium 1.0; Lithium 1.0; Sodium 0.9; Barium 0.9; Radium 0.9; Rubidium 0.8; Potassium 0.8; Cesium 0.7 Other common elements range in electro negativity between these high and low groups. The greater the separation of two elements on the Electro negativity Scale, the greater is the strength of the bond between these two elements. When comparing the relative Electro Negativities of the Ceramic Nanotech Ceramic Globes and the Water Solution, the electro negativity of the ceramics is less than the overall electro negativity of the water solution. Therefore, the core loses (gives up) more electrons than it acquires to elements such as hydrogen (H+) ions, which have an electro negativity of 2.1, and to ionic compounds (radicals) such as SO42- and CO32-, which have higher electro negativities than the core alloy. The relatively large distances between the nucleus and the electrons of atoms have been described as follows: If an atom were as large as a house, its nucleus (which is positively charged) would be about the size of the period at the end of this sentence, or a pin head, and its outer-shell electron orbits would be out where the walls of the house are. The electrons (which are negatively charged) would be smaller than specks of dust that float in the air. When bonded with another atom(s), the outer orbital shell is pulled out into an egg shape even beyond the boundaries of the walls of the house because of the attraction of the other atom(s). When water is in the form of ice, the molecules and ions in it are held in a relatively rigid pattern. But in the liquid state, this structure becomes a dynamic, whirling, chaotic dance in which groups of molecules and ions in the solution take turns whirling about one another, breaking their bonds, and finding new groups to find partners with.
When water rushes through the HYDRO CLUSTER /NANODESOFT conditioner, the pattern becomes even more frenetic; and electron orbits and associated bondings undergo increased perturbations and stresses, and additional electrons from the core are attracted into the water solution.
Verifiability of the Relative Electro negativities of the Core and the Water Solution.
The loss of electrons by the metallic ceramic conditioner to the water solution is easily verifiable by: (1) adapting the conditioner to a garden hose; (2) turning on the hose faucet; (3) connecting the positive lead of a multimeter to the conditioner core; (4) inserting the negative lead probe into the water stream; and (5) observing a voltage drop. The fact that the conditioner goes positive with respect to the outlet water stream indicates that electrons are being removed from the metallic ceramic conditioner by the water solution as it flows through the core.
THE ELECTROMOTIVE SERIES The electro negativities of various elements were listed previously to indicate their relative potentials or dispositions regarding electron acquisitiveness. Electron acquisitiveness can be regarded as "reduction potential." Reduction of an element occurs when its valence becomes more negative (or less positive); for example, in the reaction e-+ Cl2 + H2O <-----> HOCl- + Cl- + H+ one atom of Cl2 is reduced to Cl-. Oxidation, which is the opposite of reduction, occurs to an element when its valence becomes more positive (or less negative); for example, in the reaction 2 Cl- --> Cl2 + 2e- 2 Cl- is oxidized to 2 Clo to provide chlorine gas plus two electrons which are available (or can be made available) for reduction of another substance in the solution or circuit. The Electromotive Series is a listing of elements and compounds rank-ordered according to their oxidation potentials or dispositions regarding electron relinquishment (or their tendency to lose electrons). The higher or more positive the oxidation potential of an element, the better the element is as a reducing agent. The following is a partial listing of the Electromotive Series.
OXIDATION POTENTIAL (VOLTS) AT 1 MOLE CONCENTRATION Lio --> LI+ + e (+3.05); Cao --> Ca2+ 2e (+2.76); NaO --> Na+ + e- (+2.71); Mgo --> Mg2++ 2e- (+2.37); Alo --> Al3+ + 3e (+1.66); Zno --> Zn2+ + 2e- (+0.76); FeO --> Fe2+ + 2e- (+0.4 4) H2 + 2 H2O --> 2 H3O+ 2e- (0.0) Cuo --> Cu2+ + 2e- (-0.34); 2I- --> I2 + 2e- (-0.54); AgO --> Ag+ + e- (-0.80); HgO --> Hg2+ 2e- (-1.09); 6 H2O --> O2 + 4 H3O + 4e- (-1.23); 2 Cl- --> Cl2 + 2e- (-1.36); 2 F- --> F2 + 2e- (-2.87) The Electromotive Series and the Electro negativity listings provide fundamental frames of reference and some insight into: (1) the many ways in which the elements can interact with each other; (2) why they interact as they do; (3) under what conditions changes or reactions will occur or will not occur; and (4) the reasons that metals can function as catalytic water conditioning agents. The Addition of Electrons to the Water Solution and Their Effects on Scale Electrons are drawn into the water solution because the solution contains ions that are more electronegative than the ceramic media is. Or in terms of the Electromotive Series, the ceramic nanotech conditioner core contains elements which have higher oxidation>n potentials than ions in the water solution.
As the water flows through the ceramic nanotech conditioner, some of the electrons drawn into the solution displace some already captured by ions such as CO32-, HCO3-, SO42-, and OCI- during the turbulent orbiting of the various electrons. This allows the "displaced" electrons to become "free electrons" in the solution and these "free electrons" can be captured by ions or colloids with lesser electro negativities such as Ca2+ and Mg2+ to free themselves of CO32-, SO42-, and HCO3-, and assume their neutral atomic structures (Cao and Mgo) and break away from their ionic bonds while in solution or from lattice scale bonds in cases where they arc in solid precipitated or scale form. This abounds in cases where they are in solid precipitated or scale form. The increased electron count in the water also inhibits the breakdown of the bicarbonate ion into H+ and CO32- when heater in water heaters and boilers or when alkalinity reaches Levels above pH 8.4.
By acquiring or reacquiring a negative charge, colloidal substances such as silica, alumina, and rust particles remain in suspension instead of becoming absorbed onto calcium, magnesium, and iron ions; the acquisition of the negative charge also causes these colloidal substances to be repelled from these ions in the flowing water if they were already absorbed onto them.
This separation inhibits the hardness effects of these three ions; hardness in water is always due to the presence of Ca+, Mg2+, and/or Fe2+ ions. The silica and alumina are also able to escape from existing scale lattices to which they have been absorbed and for which they have been functioning as finders.
Thus, the scale lattices are gradually broken down and eliminated by the escaping Cao and Mgo elements and negatively charged SiO2(-) and A12O3(-) colloids. The inhibiting effects of the catalytic alloy conditioner on scale formation can be summarized as follows: (1) Ca2+ + 2e---> CaO ; (2) Mg2+ + 2e---> MgO ; (3) xSiO2 + Ex.- --> xSiO2(-); (4) xAl2O3 +Ex.---> xAl2O3 (-); (5) xFe2O3 + Ex.---> xFe2O3 (-); (6) 2 HCO-3 + Ex.- heat>-> 2 HCO-3 + Ex.- (inhibition of the CO32- + H2O + CO2 reaction) The inhibiting effects in heaters and boilers can be summarized as follows: (7) Cao + 2 HCO3- heat_> Ca_ + H2O + 2 CO2 (8) 2 CO32- heat_> 2 CO2 + O2 + 4e- (9) 2 HCO-3 + Ex.- heat_>2 HCO-3 + Ex.- (inhibition of the CO32- + H2O + CO2 reaction) (10) Al203 (-) + SiO2(-) heat_> Al2O3- + Si02(-) (remain in suspension as colloids) (11) Cao + SO42- heat_> Cao + S042- (precipitation of CaSO4 is inhibited) (12) Fe2O3(-) heat_> Fe2O3(-) (Remains in suspension as a colloid) The scale dissolving effects in water heaters, boilers, pipes, valves, and other plumbing or agricultural irrigation components are summarized by the following simplified equation: (13) CaCO3 . CaSO4. SiO2. MgCO3. A12O3. Fe2O3 + 9e- ----> 2 Cao + Mgo + 2 CO32- + SO42- + SiO2(-) + Al2O3 (-) + Fe2O3(-) The acquisition of one or two electrons by a calcium ion (Ca2+) will immediately cause other substances to bond with it. A typical reaction is: (14) q Cao + r Ca(+) + s H2O --> t Ca(OH)2 + u Ca(OH)+ + v H+, where the H+ and OH- ions are derived from H2O molecules. The H+ ions are very useful in the breaking down of calcium carbonate. If small or weak concentrations of the hydrogen ions are added to the water solution, carbonate ions are removed by the formation of bicarbonate ions. (15) H+ CO32- --> HCO3- The bicarbonate ions are then decomposed by the hydrogen ions as follows: (16) H+ HCO3- --> H2O + CO2 The Ca(OH)+ formed in equation (14) will probably bond with an electronegative ion or radical, or with a colloid with a negative charge, but will probably remain in solution instead of forming part of a precipitate. The Ca(OH)2 formed in equation (14) tends to precipitate but its solubility is approximately 40 times greater than that of CaCO3. Hence, in view of the relatively slow rates at which the Cao and Ca(+) is formed, and the proportionally slow rates at which the Ca(OH)2 are formed, it is highly unlikely the concentration of Ca(OH)2 in water heaters and boilers (and even in cold water circuits) will reach levels where precipitation will occur. The solubility of Ca(OH)2 at 100oC is 0.77 gram per liter; for CaCO3 it is 0.0190 gram per liter at 75oC. At 25oC the solubility of Ca(OH)2 is 1.85 grams per liter; for CaCO3 it is 0.0153 gram per liter at 25oC. Conditioned water that has dried on surfaces exposed to air will leave water spots due to the minerals in the water, but these spots are easily removed with a damp cloth and do not leave hard water stains.
This is due to the neutralization of the scale binders and the calcium and magnesium as indicated in equations (1) through (5) above. In zeolite water softeners, Ca2+ and Mg2+ ions in the water are exchanged for Na+ ions (absorbed onto the zeolite) that are released and rush into the water solution as the water passes through the zeolite. Interestingly, zeolite consists of an aluminum-silicon-oxygen compound to which Ca and Mg are absorbed until flushed away during the recharging cycle while the metallic ceramic conditioner supplies negative charges to SiO2 and Al2O3 colloids in order to keep them in suspension and to keep them from becoming absorbed onto calcium and magnesium compounds and functioning as scale binders. Cao and Mgo readily oxidize in air to form CaO, MgO, Ca3N2, and Mg3N2, but these compounds are easily wiped off.
The thin, waxy, shiny, protective, water-repellent finish that forms and is noticeable on chrome and mirrors after the ceramic nanotech conditioned water is wiped off of these surfaces is a combination of various forms of calcium and magnesium compounds together with colloidal alumina and silica and is a welcome by-product of the conditioner.
The Insulating Effects of Water.
(H2O) molecules are excellent electrical insulators; and for this reason, at the low-voltage levels at which these catalytic actions and reactions occur, most of the electrons that are transferred from the metallic ceramic nanotech conditioner to the ions and colloids in the water remain in the solution instead of escaping back to earth ground. Consequently, most of the additional electrons transferred from the piso-electrical effect of the conditioner’s metallic ceramic media to the water solution stay in the solution and are able to provide the negative charges necessary for preventing scale from forming and for decomposing existing scale.
The Effects of the Negatively Charged Colloids on External Surfaces and Wash Water.
Another important benefit resulting from the negative charging of the colloidal substances such as silica, alumina, and clay is that these substances form a negatively charged microscopic coating on surfaces such as glass, windows, chrome, porcelain, tile, enamel, lacquer, etc. This coating becomes very evident on surfaces such as mirrors and chrome faucets, on which residue from evaporated water is easily wiped off with a damp cloth, leaving a sparkling, wax-like, polished surface finish as mentioned in Section 3.5. Other examples of the effects of these negatively charged colloids is the way toilet bowls stay "ring free" and the way shower enclosures stay cleaner much longer. In addition to these effects on external surfaces, the increased negativity provided to water solutions keeps soap scum particles in colloidal suspension in the water, inhibiting precipitation of soap scum and formation of "bathtub ring" when regular soap is used instead of detergent-type soap such as Zest. Detergents do not react with calcium to form soap scum but do leave residues with unconditioned waters. Scum and residue that do collect on bathtub or other surfaces are very easily rinsed off with fresh water and also easily go back into colloidal suspension in the same water when the water is splashed on the scum or residue before it is allowed to dry. The change in molecular tension is effected due to the additional electrons in the water solution as a result of the reduction in hydrogen bonding between H2O molecules. H2O molecules link up to each other because of the dipole nature of the individual H2O molecules.
The additional negative charges in the solution reduce the bonding of the oxygen atoms of H2O molecules and the hydrogen atoms of other H2O molecules (i.e., hydrogen atoms other than those in their own molecules) by supplying the negative charges (electrons) that the oxygen atoms attract. As a result, there are fewer hydrogen bonds between the individual H2O molecules. This results in lower surface tensions, which in turn results in better cleaning water and better soil-leaching water. The breaking up of the H2O groupings into smaller groupings, because of the decrease in hydrogen bonding, enables soap and detergent to break up into smaller groupings and interface with the smaller H2O groupings. This results in a greatly increased surface area that can come in contact with grease, oil, dirt, and other contaminants in wash water. The surface area increases exponentially with decreases in the size of the groupings. Consequently, soap, detergents, and shampoos become more efficient and considerably fewer amounts are required when used with the conditioned water. Typically, people who require shampooing twice with unconditioned water require only one shampooing with the conditioned water.
Boiling Characteristics of Conditioned Water Versus Non-conditioned Water All other things being equal, the decrease in surface tension due to the decrease in hydrogen bonding of the water molecules reduces the boiling point of water. However, microwave oven tests conducted on equal amounts of conditioned and unconditioned water sometimes show that the boiling point of the conditioned water sample is higher than that of the unconditioned water sample. This apparent paradox can be explained when it is remembered that the gaseous content of the conditioned water is reduced by the metallic ceramic conditioner. This can result in an increase in the molecular weight of the water for the given volume. According to the van der Waals Attraction Principle, which is used to explain differences in boiling points of different substances, normal molecular substances with larger molecular weight have higher boiling points than those with smaller molecular weight. However, after the unconditioned water is boiled and most of its gases have been driven out by the heating, its boiling point will usually be higher because its hydrogen bonding is greater than that of the conditioned water.
Results can also vary if the conditioned and the unconditioned water samples are drawn from different homes on the same street and have different amounts of dissolved solids, as when a ceramic nanotech conditioner (CNC) has been installed and in use in a home for several weeks and has reduced the amount of solids in the water sample contributed by the scale in the plumbing in the house. In any event, conditioned water characteristically boils in a steadier, smoother pattern with smaller, more uniform-sized bubbles than does unconditioned water, thereby demonstrating another effect that decreased hydrogen bonding has on water.
Removal of Chlorine and Other Gaseous Substances from Water
Every metal surface contains many small anodes and cathodes. These opposite-polarity sites are caused by: (1 ) surface irregularities resulting from forming, extruding, casting, or other fabrication processes; (2) stresses from welding, forming, or other operations; and/or (3) differences in the materials of which the metal or alloy is composed. Because the ceramic globes of the HYDRO CLUSTER /NANODE-SOFT Water Conditioner consists of many different metals specially proportioned and processed, and because the metallic ceramic globes are formed by nanotechnology and have relatively increased surfaces, the quantity and power of the anodic and cathodic points have been maximized by the above-mentioned causes (1) and (3). The conditioner’s metallic ceramic globes contain thousands of cathodes which supply electrons to positively charged ions in the water (such as H+) but also contain thousands of anodes that remove electrons from negative ions such as Cl-, allowing them to gather together as neutral gases such as Cl2. However, more electrons are supplied by the ceramic globes to the water solution than are removed from the solution because the globes, being ceramic metallic are more electropositive than is the water solution. The anodes and cathodes on certain metal surfaces also cause anodic and cathodic reactions that result in typical rusting or corrosion of these surfaces in plumbing systems. However, the conditioner ceramic globes are nonferrous and highly resistant to rusting and corrosion. The turbulence resulting from the water rushing through the conditioner globes facilitates the removal of gases by increasing the probabilities of gaseous elements such as Clo and No contacting other like elements and forming Cl2 gas and N2 gas, respectively. It should be noted that Cl2 (chlorine gas) is 2.49 times as heavy as air, however, and therefore will not rise up into the air at ordinary temperatures. For this reason, chlorine can more easily be smelled in a container only partly filled with chlorinated water conditioned by a catalytic ceramic conditioner than in the case where the container is filled with the water to overflowing.
Rust and Other Electrochemical Metal Corrosion
Rust is a type of corrosion involving the special case of iron. Rust formation requires three electrochemical steps: 1. Loss of metal occurs at the anodic area (anode) of the surface. In the case of iron, iron (Feo) is lost to the water solution and becomes oxidized to Fe2+ ion. 2. As a result of the formation of Fe2+, two electrons are released from the Fe atom and flow through the steel to a cathodic area (cathode). 3. Oxygen (O2) in the water solution moves to the cathode and completes the electric circuit by using the two electrons that moved to the cathode to form hydroxyl ions (OH-) at the cathode area.
The reactions are as follows: (1) Anodic reaction: Feo --> Feo + 2e (2) Cathodic reaction: 1/2 O2 + H2O + 2e---> 2(0H-) (3) or e- + H+ --> Ho If oxygen is absent, hydrogen ions (H+) participate in the reaction (equation (3) at the cathode instead of oxygen and completes the electrical circuit). The Fe2+ and OH- ions combine to form ferrous hydroxide as follows: (4) Fe2+ + 2 OH- --> Fe(OH)2 Rust is formed when Fe(OH)2 is oxidized: (5) 2 Fe(OH)2 + 1/2 O2 --> Fe2O3 . 2 H2O Corrosion is inhibited if the iron is made more negative compared to its surroundings, forcing the anode areas to act as cathodes. This is accomplished by the attraction of some of the extra electrons in the water solution (supplied by the conditioner) onto the anodic areas, thereby preventing the ionization of the Fe atoms. The additional electrons also dissolve rust by breaking it into fine colloidal particles.
In a similar manner, corrosion is also inhibited and dissolved for metals other than iron such as brass and aluminum. It is interesting to note that the addition of electrons to anodic areas in order to prevent corrosion has been accomplished by other means in industry. This method has been called "cathodic protection." Zinc plating is one example of this method of cathodic protection since zinc has a higher oxidation potential than iron and forces electrons onto the iron. Cathodic protection has also been obtained by driving stakes of magnesium or zinc into the ground and connecting them to pipelines or standpipes to be protected. Water scientists have found that in addition to rust formed simply by corrosion, rust can be formed and deposited by iron-depositing bacteria in the water such as Sphaerotilus and Gallionella. Iron-depositing bacteria prefer water high in ferrous iron, which they convert to insoluble ferric hydroxide, Fe(OH)3, which becomes part of the mucilaginous sheath around the cell. These deposit on galvanized steel pipes and accelerate corrosion rates, which produce additional soluble iron, further increasing the population of iron-depositing bacteria in the system.
The cycle sometimes continues until the whole system is plugged with oxidized iron deposits or until a pipe becomes rusted all the way through its walls. The cathodizing function of the HYDRO CLUSTER /NANODESOFT Water Conditioner also causes the Fe(OH)3 to break up into fine colloidal particles and go into suspension.
Effects of the Conditioner on Algae and Fungus/Mildew Growth
Catalytic ceramic alloy conditioned water has been found to have noticeable inhibiting effects on algae and fungus/mildew growth. In addition, it has been observed that chlorine stays in swimming pool water longer and does not have to be replenished as often. Chlorine gas dissolved in water hydrolyzes readily according to the following equation: (1) C12 + H2O --> H+ + C1- + HOCI Hypochlorous acid (HOCI) is the active microbiocidal ingredient formed by this reaction. This weak acid tends to undergo partial disassociation as follows: (2) HOCl --> H+ + OCI- This produces a hydrogen ion and hypochlorite ion. When the pH exceeds 9.5 in unconditioned water, HOCI completely dissociates into H+ + OCI-. The toxicity of chlorine is thought to be derived not from the chlorine itself or its release of nascent oxygen, but rather from the reaction of the HOCI on the enzyme system of the cell. The superiority of HOC1 over OCI appears to be due to the small molecular size and the electrical neutrality of HOCI, which allow it to pass through the cell membrane.
The metallic ceramic nanotech conditioner decreases the dissociation of HOCI (equation (2)) by providing additional electrons to the water solution which has the net effect of inhibiting the rise in the pH of swimming pool water. This is due to inhibition of the following reaction which occurs at alkalinity levels above pH 8.4. (3) HCO3 --> H+ + CO32- , where H+ breaks away from CO32-. These inhibiting effects appear to be due to the net decrease in oxidation reactions that take place in the conditioned water as compared to the amount that takes place in nonconditioned water. Oxidation reactions involve the removal of electrons from elements low on the Electro negativity Scale and high on the Electromotive Series by elements or radicals at the opposite polarity. By supplying electrons to the water solution, the oxidation reactions appear to be inhibited to a significant extent. Another result of the inhibiting of the dissociation of OCI-from HOCI is that the chlorine concentration in swimming pools in preserved for longer periods of time because OCI- is more easily broken down by sunlight than is HOCI.
The ability of the metallic ceramic nanotech conditioner to reduce the gaseous content of the water solution probably also contributes to inhibition of algae growth. Algae require nitrogen as well as phosphorous and sunlight for growth. By reducing the nitrogen content of the water, the conditioner reduces the nutrient supply of algae. The reduction of mildew and fungus growth commonly reported by users of the ceramic nanotech conditioner can be explained by: (1) the increased "sheeting" action of the conditioned water resulting in faster drying of shower enclosures and sprinkled plant leaves; (2) reduction of N2 in the water required for fungus and mildew growth; and (3) a slight increase in cupric sulfate (CuSO4). The addition of electrons to the water allows more SO4-2 ions to bond ionically with Cu2+ ions in the water to form CuSO4 which acts as a fungicide.
Summary: The potable water supplied to us is basically electron-deficient and not in optimum states of equilibrium. In accordance with the electro negativities of chemical elements and the oxidation potentials of the elements as listed in the Electro negativity Scale and the Electromotive Series, respectively, the HYDRO CLUSTER /NANODESOFT Water Conditioner provides electrons to the water solution in a catalytic manner to reduce electron deficiencies in the water. This enables electrochemical changes to occur that: (1) inhibit scale and corrosion formation; (2) dissolve existing scale and corrosion; (3) increase the wetness and cleaning power of water; (4) decrease the gaseous content of water; (5) break down and leach away excessive salts from soil; and (6) inhibit algae, fungus, and mildew growth.
Because of the dipolar (cathodic and anodic) nature of all formed metals, the HYDRO CLUSTER /NANODESOFT Water Conditioner also removes electrons from some negative ions.
However, the HYDRO CLUSTER /NANODESOFT Water Conditioner provides a significant net increase of electrons for the ions and colloids in the water solution, resulting in: (1) inhibition of undesirable oxidation reactions; (2) an increase of beneficial reduction reactions; and (3) keeping/putting of scale-binding particles and rust/corrosion particles in colloidal suspension by providing them with negative charges.
References Blanning, H.K. and Rich, A.D., Boiler Feed and Boiler Water Softening, Nickerson & Collins Co., Chicago, 1942 Boynton, Robert S., Chemistry and Technology of Lime and Limestone, Interscience Publishers, a division of John Wiley & Sons, NY, 1966 Breck, Donald W., Zeolite Molecular Sieves, John Wiley & Sons, NY 1974 Briscoe, Herman T., General Chemistry for Colleges, The Riverside Press, Cambridge, MA, 1949 Campbell, J. Arthur, Why Do Chemical Reactions Occur?, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1965 Hulthgren, Ralph, Fundamentals of Physical Metallurgy, Prentice-Hall, Inc., NJ, 1952 Informatics, Inc., Magnetic Treatment of Water, Informatics, Inc., Rockville, MD, 1973 (Reproduced by National Technical Information Service, U.S. Dept. of Commerce, Springfield, VA) Kemmer, Frank N. and McCallion, John, eds., The NALCO Water Handbook, McGraw-Hill Book Co., NY, 1979 Leopold, Luna B. and Davis, Kenneth S., Water, Time Inc., NY, 1966 Manahan, Stanley E., General Applied Chemistry, Willard Grant Press, Boston, MA, 1978 Mellor, J.W., Mellor's Modern Inorganic Chemistry, Longmans, Green and Co., Lts., 1967 Pauling, Linus, The Chemical Bond, Cornell University Press, Ithaca, NY, 1967 Sienko, Michell J. and Plane, Robert A., Chemistry, McCraw-Hill Book Co., NY, 1971 Weast, Robert C., ea., Handbook of Chemistry and Physics, CRC Press, OFI, 1977.